VEHICLE SERVICE EQUIPMENT

Two Post Automotive Lifts

BendPak Two Post Automotive Lifts

XPR-10AC - 10,000 lb. Capacity

Asymmetric, Clear Floor, Narrow Design

Two Post Automotive Lifts

Features
  • 10,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Exclusive Tru-Metric arm design provides more versatile arm positioning
  • 30° rotated single-piece columns
  • Single-point safety release
  • Wide or narrow drive-thru configuration
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 3/8" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set comes standard
  • Triple-telescoping and low-profile arm options available
  • Versatile drop-in contact pads with stackable adapters

Two Post Automotive Lifts

Specifications
  • Lifting capacity*: 10,000 lbs. / 4,536 kg
    • *Max capacity / front axel: 5,000 lbs. / 2,268 kg
    • *Max capacity / rear axel: 5,000 lbs. / 2,268 kg
  • Overall height: 145" / 3,683 mm
  • Overall width (outside of base plate): 132" / 3,353 mm
  • Width (outside of columns): 126" / 3,200 mm
  • Floor to overhead switch: 141" / 3,581 mm
  • Inside columns: 99" / 2,515 mm
  • Front arm min reach: 23-1/2" / 597 mm
  • Front arm max reach: 43-3/4" / 1,111 mm
  • Rear arm min reach: 40-1/2" / 1,029 mm
  • Rear arm max reach: 58" / 1,473 mm
  • Min pad height: 4" / 102 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 73" / 1,854 mm
  • Lift height max (6" adapter): 79" / 2,007 mm
  • Drive-thru clearance: 89" / 2,261 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,500 lbs. / 1,134 kg
  • Shipping weight: 1,770 lbs. / 805 kg
  • Shipping dimensions: 151" x 18" x 51" / 3,835 mm x 457 mm x 1,295 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

XPR-10ACX - 10,000 lb. Capacity

Asymmetric, Clear Floor, Wide Design

Two Post Automotive Lifts

Features
  • 10,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Exclusive Tru-Metric arm design provides more versatile arm positioning
  • 30° rotated single-piece columns
  • Single-point safety release
  • Wide or narrow drive-thru configuration
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 3/8" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set comes standard
  • Triple-telescoping and low-profile arm options available
  • Versatile drop-in contact pads with stackable adapters

Two Post Automotive Lifts

Specifications
  • Lifting capacity*: 10,000 lbs. / 4,536 kg
    • *Max capacity / front axel: 5,000 lbs. / 2,268 kg
    • *Max capacity / rear axel: 5,000 lbs. / 2,268 kg
  • Overall height: 145" / 3,683 mm
  • Overall width (outside of base plate): 145" / 3,683 mm
  • Width (outside of columns): 139" / 3,531 mm
  • Floor to overhead switch: 141" / 3,581 mm
  • Inside columns: 112" / 2,845 mm
  • Front arm min reach: 25-1/2" / 648 mm
  • Front arm max reach: 49-1/2" / 1,257 mm
  • Rear arm min reach: 40-1/2" / 1,029 mm
  • Rear arm max reach: 58" / 1,473 mm
  • Min pad height: 4" / 102 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 73" / 1,854 mm
  • Lift height max (6" adapter): 79" / 2,007 mm
  • Drive-thru clearance: 102" / 2,591 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,500 lbs. / 1,134 kg
  • Shipping weight: 1,798 lbs. / 817 kg
  • Shipping dimensions: 151" x 18" x 51" / 3,835 mm x 457 mm x 1,295 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

XPR-12C - 12,000 lb. Capacity

Clear Floor Design with Triple Telescoping Arms

Two Post Automotive Lifts

Features
  • 12,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • 8-piece truck and van adapter set comes standard
  • Convenient storage is included for truck and van adapters
  • Triple-telescoping arms provide increased range for lifting point access
  • Versatile drop-in contact pads with stackable adapters

Two Post Automotive Lifts

Specifications
  • Lifting capacity*: 12,000 lbs. / 5,443 kg
    • *Max capacity / front axel: 6,000 lbs. / 2,722 kg
    • *Max capacity / rear axel: 6,000 lbs. / 2,722 kg
  • Overall height: 170" / 4,318 mm
  • Overall width (outside of base plate): 155" / 3,937 mm
  • Width (outside of columns): 144" / 3,658 mm
  • Floor to overhead switch: 165” / 4,191 mm
  • Inside columns: 120" / 3,048 mm
  • Front arm min reach: 32" / 813 mm
  • Front arm max reach: 60" / 1,524 mm
  • Rear arm min reach: 32" / 813 mm
  • Rear arm max reach: 60" / 1,524 mm
  • Min pad height: 5" / 127 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 74" / 1,880 mm
  • Lift height max (6" adapter): 80" / 2,032 mm
  • Drive-thru clearance: 106" / 2,592 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 3,000 lbs. / 1,361 kg
  • Shipping weight: 2,588 lbs. / 1,176 kg
  • Shipping dimensions: 172" x 29" x 54" / 4,369 mm x 737 mm x 1,372 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

XPR-12FD - 12,000 lb. Capacity

Floor Plate Design with Triple Telescoping Arms

Two Post Automotive Lifts

Features
  • 12,000-lb lifting capacity
  • Open-top eliminates overhead obstruction
  • Wide or narrow drive-thru configuration
  • Single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 25" x 22" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized 6" cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set comes standard
  • Triple-telescoping arms provide increased range for lifting point access
  • Versatile drop-in contact pads with stackable adapters

Two Post Automotive Lifts

Specifications
  • Lifting capacity*: 12,000 lbs. / 5,443 kg
    • *Max capacity / front axel: 6,000 lbs. / 2,722 kg
    • *Max capacity / rear axel: 6,000 lbs. / 2,722 kg
  • Overall height: 144" / 3,403 mm
  • Overall width (outside of base plate): 155" / 3,937 mm
  • Width (outside of columns): 146" / 3,708 mm
  • Cover height: 2" / 51 mm
  • Inside columns: 118" / 2,997 mm
  • Front arm min reach: 39" / 991 mm
  • Front arm max reach: 59" / 1,499 mm
  • Rear arm min reach: 39" / 991 mm
  • Rear arm max reach: 59" / 1,499 mm
  • Min pad height: 5" / 127 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 74" / 1,880 mm
  • Lift height max (6" adapter): 80" / 2,032 mm
  • Drive-thru clearance: 103" / 2,616 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 55 sec
  • Max load per arm: 3,000 lbs. / 1,361 kg
  • Shipping weight: 2,458 lbs. / 1,117 kg
  • Shipping dimensions: 151" x 29" x 54" / 3,835 mm x 737 mm x 1,372 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

XPR-15C - 15,000 lb. Capacity

Clear Floor Design

Two Post Automotive Lifts

Features
  • 15,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • 8-piece truck and van adapter set comes standard
  • Convenient storage is included for truck and van adapters
  • Triple-telescoping arms provide increased range for lifting point access
  • Versatile drop-in contact pads with stackable adapters

Two Post Automotive Lifts

Specifications
  • Lifting capacity*: 15,000 lbs. / 6,804 kg
    • *Max capacity / front axel: 7,500 lbs. / 3,402 kg
    • *Max capacity / rear axel: 7,500 lbs. / 3,402 kg
  • Overall height: 170" / 4,318 mm
  • Overall width (outside of base plate): 155" / 3,937 mm
  • Width (outside of columns): 144" / 3,658 mm
  • Floor to overhead switch: 165" / 4,191 mm
  • Inside columns: 120" / 3,048 mm
  • Front arm min reach: 39" / 991 mm
  • Front arm max reach: 60" / 1,524 mm
  • Rear arm min reach: 39" / 991 mm
  • Rear arm max reach: 60" / 1,524 mm
  • Min pad height: 5" / 127 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 74" / 1,880 mm
  • Lift height max (6" adapter): 80" / 2,032 mm
  • Drive-thru clearance: 106" / 2,692 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 3,750 lbs. / 1,701 kg
  • Shipping weight: 2,986 lbs. / 1,357 kg
  • Shipping dimensions: 172" x 29" x 54" / 4,369 mm x 737 mm x 1,372 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

XPR-18C - 18,000 lb. Capacity

Clear Floor Design

Two Post Automotive Lifts

Features
  • 18,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • 8-piece truck and van adapter set comes standard
  • Convenient storage is included for truck and van adapters
  • Triple-telescoping arms provide increased range for lifting point access
  • Versatile drop-in contact pads with stackable adapters

Two Post Automotive Lifts

Specifications
  • Lifting capacity*: 18,000 lbs. / 8,165 kg
    • *Max capacity / front axel: 9,000 lbs. / 4,082 kg
    • *Max capacity / rear axel: 9,000 lbs. / 4,082 kg
  • Overall height: 170" / 4,318 mm
  • Overall width (outside of base plate): 155" / 3,937 mm
  • Width (outside of columns): 144" / 3,658 mm
  • Floor to overhead switch: 165" / 4,191 mm
  • Inside columns: 120" / 3,048 mm
  • Front arm min reach: 39" / 991 mm
  • Front arm max reach: 60" / 1,524 mm
  • Rear arm min reach: 39" / 991 mm
  • Rear arm max reach: 60" / 1,524 mm
  • Min pad height: 5" / 127 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 74" / 1,880 mm
  • Lift height max (6" adapter): 80" / 2,032 mm
  • Drive-thru clearance: 106" / 2,692 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 4,500 lbs. / 2,041 kg
  • Shipping weight: 3,333 lbs. / 1,515 kg
  • Shipping dimensions: 172" x 29" x 54" / 4,369 mm x 737 mm x 1,372 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

XPR-9F - 9,000 lb. Capacity

Floor Plate, Narrow Design

Two Post Automotive Lifts

Features
  • 9,000-lb lifting capacity
  • Short column for low-ceiling installations
  • Wide or narrow drive-thru configuration
  • Single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Oversized 53" tall carriage for superior strength and durability
  • Chain lifting system combined with dual hydraulic cylinders
  • Electric / hydraulic power system
  • Large, 20" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 3/8" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set standard
  • Triple-telescoping / low-profile arms option available
  • Versatile drop-in contact pads with stackable adapters

Two Post Automotive Lifts

Specifications
  • Lifting capacity*: 9,000 lbs. / 4,082 kg
    • *Max capacity / front axel: 4,500 lbs. / 2,041 kg
    • *Max capacity / rear axel: 4,500 lbs. / 2,041 kg
  • Overall height: 128" / 3,251 mm
  • Overall width (outside of base plate): 132" / 3,353 mm
  • Width (outside of columns): 124" / 3,150 mm
  • Cover height: 2" / 51 mm
  • Inside columns: 102" / 2,591 mm
  • Front arm min reach: 23-1/2" / 597 mm
  • Front arm max reach: 43-3/4" / 1,111 mm
  • Rear arm min reach: 32-1/2" / 825 mm
  • Rear arm max reach: 52-1/2" / 1,333 mm
  • Min pad height: 4" / 102 mm
  • Rise: 72" / 1,829 mm
  • Lift height max (pad only): 76" / 1,930 mm
  • Lift height max (6" adapter): 82" / 2,083 mm
  • Drive-thru clearance: 93" / 2,362 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,250 lbs. / 1,021 kg
  • Shipping weight: 1,748 lbs. / 795 kg
  • Shipping dimensions: 128" x 17" x 48" / 3,251 mm x 432 mm x 1,219 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

XPR-9FD - 9,000 lb. Capacity

Floor Plate, Wide Design

Two Post Automotive Lifts

Features
  • 9,000-lb lifting capacity
  • Open-top eliminates overhead obstruction
  • Wide or narrow drive-thru configuration
  • Single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 20" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 3/8" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set comes standard
  • Triple-telescoping / low-profile arms option available
  • Versatile drop-in contact pads with stackable adapters

Two Post Automotive Lifts

Specifications
  • Lifting capacity*: 9,000 lbs. / 4,082 kg
    • *Max capacity / front axel: 4,500 lbs. / 2,041 kg
    • *Max capacity / rear axel: 4,500 lbs. / 2,041 kg
  • Overall height: 145" / 3,683 mm
  • Overall width (outside of base plate): 132" / 3,353 mm
  • Width (outside of columns): 124" / 3,150 mm
  • Cover height: 2" / 51 mm
  • Inside columns: 102" / 2,591 mm
  • Front arm min reach: 23-1/2" / 597 mm
  • Front arm max reach: 43-3/4" / 1,111 mm
  • Rear arm min reach: 32-1/2" / 825 mm
  • Rear arm max reach: 52-1/2" / 1,333 mm
  • Min pad height: 4" / 102 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 73" / 1,854 mm
  • Lift height max (6" adapter): 79" / 2,007 mm
  • Drive-thru clearance: 93" / 2,362 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,250 lbs. / 1,021 kg
  • Shipping weight: 1,724 lbs. / 784 kg
  • Shipping dimensions: 151" x 18" x 51" / 3,835 mm x 457 mm x 1,295 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

XPR-7TRF - 7,000 lb. Capacity

Clear Floor, Narrow, Pad Style

Two Post Automotive Lifts

Features
  • 7,000-lb. lifting capacity
  • Wide drive-thru configuration
  • Single-piece columns
  • Single-point safety release
  • Dual hydraulic direct-drive cylinders
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Fully adjustable full-width wheel pan and fork assemblies
  • Accommodates a wide variety of vehicle assemblies
  • Full-width wheel pan is ideal for single - or dual-wheeled vehicles
  • Heavy-duty 3/8" aircraft-quality equalizer cables
  • Padded overhead safety shutoff bar

Two Post Automotive Lifts

Specifications
  • Lifting capacity: 7,000 lbs. / 3,175 kg
  • Max wheel pan load: 3,500 lbs. / 1,588 kg
  • Max load per fork: 1,750 lbs. / 794 kg
  • Overall height: 145" / 3,683 mm
  • Width (outside of columns): 137" / 3,480 mm
  • Overall width (outside of base plate): 145" / 3,683 mm
  • Floor to overhead switch: 141" / 3,581 mm
  • Inside columns: 115" / 2,921 mm
  • Max rise: 69" / 1,753 mm
  • Drive-thru clearance: 106" / 2,692 mm
  • Lifting time: 45 sec
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Shipping weight: 2,166 lbs. / 985 kg
  • Shipping dimensions: 148" x 27" x 28" / 3,759 mm x 686 mm x 711 mm

Two Post Automotive Lifts

Related Products

BendPak Two Post Automotive Lifts

7,000 lb. Capacity

Clear Floor, Wide, Pad Style

Two Post Automotive Lifts

Features
  • 7,000-lb. lifting capacity
  • Extended pull-out top lift platform
  • Pneumatic safety locks
  • Equalization torsion bar
  • Hardened pivot pins with "Zirk" fittings
  • Open-center design
  • Ergonomic controls
  • Dual-cylinder hydraulic design provides extra power
  • Low-profile

Two Post Automotive Lifts

Specifications
  • Lifting capacity: 7,000 lbs. / 3,175 kg
  • Max lifting height: 68" / 1,727 mm
  • Overall length: 163-1/2" / 4,153 mm
  • Overall width: 74-1/2" / 1,892 mm
  • Lift platform: 21-1/2" x 63" – 70" / 47 mm x 1,600 mm – 1,778 mm
  • Lowered height: 5" / 127 mm
  • Width between pads: 31-1/2" / 801 mm
  • Lifting time: 45 sec
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Shipping weight: 2,318 lbs. / 1,054 kg
  • Shipping dimensions: 106" x 76" x 46" / 2,692 mm x 1,930 mm x 1,168 mm

Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Two Post Automotive Lifts

Related Products
Note: The features and specifications listed above are provided by the manufacturer(s) and may change without notice.
         Call Vehicle Service Equipment for Information.
About Us | Contact Us | Privacy | ©2005 Vehicle Service Equipment Corporation